How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that is full of appeal for drivers. It is powerful and has good visibility. It has a high safety rating.
It is vital to have two keys that work for your vehicle. If you lose one key, it can be expensive to replace it with the new one.
How to Replace the Ignition Key on the Saab 9-3
You must replace the car key in the event that it isn't turning. This guide will walk you through the steps to do it on the Saab 9-3. You'll need to replace the key, purchase another reprogrammable device, and buy a new case for your key-fob.
Most modern Saab models utilize transponders instead of a key made of metal to unlock the car and then start it. The issue with this is that the reprogrammable battery in the key-fob will eventually wear out and will not hold a charge for any longer. lost saab key is especially relevant if you continue to use the same key on the same lock.
A professional locksmith can replace the battery fairly easily. If you have the proper tools and patience you can do it yourself. The first step is separating the key-fob. Insert an open-ended head into the slot in the middle of your case. You will need to work slowly, as the plastic is thin and easily damaged.
Once the case is opened, you can make the new key by combining the lower part of the old key with banana and transponder. This will ensure that the new key is properly connected to your CIM and can be a major difference when replacing the sole keys for your Saab 9-3.
How to replace the ignition Key on a Saab 900
If you do not have two keys, you'll need to remove the steering wheel and dashboard to gain access to the ignition. Start by disconnecting the negative battery cable. Once the battery is disconnected, it is possible to remove all the trim pieces as well as dashboard pieces that surround the steering wheel. Once the dash has been removed, you can put a screwdriver through the opening in the back of the ignition switch and take it out.
The ignition barrel has key locks that could stop the vehicle from starting if key isn't present in the. If your 900's ignition switch isn't working, look at the key to determine whether it's in the lock or stuck in the barrel of ignition. It is also important to rotate your keys and keep them clean to prevent being bent.
Saab cars are different from other cars in the sense that they don't use traditional metal keys. Instead, the car is able to recognize the key fob's electric signals through a special chip in it.
If you only lose one key fob that is working, your dealer will charge a premium to replace your computer module (also called the CIM). However, we can reprogram the computer's EEPROM, and then prepare it to accept new keys without replacing it. This can save you over 50% of what the dealer charges! This is the SAAB Key PROGRAM. Find out more information about it here!
How do you replace the ignition Key in a Saab9-5
The metal portion of a classic Saab key is simple to copy, and also not a major obstacle against theft of vehicles. The electronic part of the key-fob is equipped with a chip that recognizes the car when the key is inserted in the ignition switch.
Saab's anti-theft system has been relying on this technology for over 10 years. It's not as good as an actual lock on the door however it makes the process of stealing your vehicle harder. This is why every Saab owner should always keep an extra key in their possession.
The majority of new Saabs are delivered with two keys, but they can be added at an agent using a handheld device referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 cars, with more modern, more advanced features that require the use of a key-fob.
If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules and charge you the cost of replacement. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.
How do you replace the ignition Key in the Saab XC90
It could be time to replace your SAAB key fob if it is experiencing difficulty turning the lock barrel. The procedure is quite simple and doesn't require you to visit a dealer. You can complete the process at home using just a few basic tools.
In the beginning, you'll need to prepare the new key. Before starting, make sure that the anti-theft device is disabled by placing blocks on the rear wheels, and then adjusting the handbrake. Then, put the key in the ignition and turn it to the ON position which activates the accessories, but it doesn't start the engine. Repeat this five times, then keep the key in the on position.
You'll then need to purchase a new case for your key fob. You can find these at any auto parts store, and they're generally quite affordable. You can get them without electronics based on the model.
To open the case to open the case, gently push the screwdriver with a flathead into the slot in the middle. When you've split the case, you'll have access to all of the internal electronic components. Use a flathead screwdriver to gently pry out the electronic components.